MOLYKOTE™ 4 Electrical Insulating Compound

Molykote 4 Electrical Insulating Compound can be applied by hand, specially designed automated equipment, brushing or wiping. Certain designs of grease guns may seize up with silicone compounds; test prior to use. A thinner consistency can be achieved by dispersing in solvents such a xylene, mineral spirits and methyl ethyl ketone. Dowsil 4 Compound can then be applied by brushing, dipping or spraying.

Molykote 4 Compound should not be applied to any surface which will be painted or finished. Such coatings may not adhere to the silicone-treated surface. If contaminated by a silicone coating, parts can be wiped or washed with solvent, washed with detergent, or immersed in an alcoholic potassium hydroxide solution and then rinsed in clear water before painting.

Applications:

A moisture proof seal for aircraft, automotive and marine ignition systems and spark plug connections, disconnection junctions in electrical wiring systems also in electrical assemblies and terminals.

Used as a seal and lubricant for cable connectors, battery terminals, rubber door seals, switches and rubber and plastic O-rings and as an assembly lubricant for various metal-on-plastic and metal-on-rubber combinations.

Features:

• High dielectric strength
• Low volatility
• Moisture resistant
• Good thermal oxidation and chemical stability
• Conforms to FDA 175.300, NSF 61 and NSF 51
• Meets requirements of SAE AS 8660
• Retains its grease like consistency from -55C (-67F) to +200C (392F)