Socomore Propaco SP3 Temporary Protective Coating 20Lt Drum

Socomore Propaco SP3 is a quick drying temporary protection coating that forms an adhesive film to protect Aircraft during Aircrafts On Ground AOG period and any other surface during storage.

Features:

• UV blocking coating for gloss retention of aircraft livery
• Efficient protection to scratches, acid rain, sand, saline or corrosive atmospheres, acid vapours, water, grease, oil and hydrocarbon overspray
• Protection of painted / unpainted metallic parts during forming, stamping operations or during transports
• Long term indoor outdoor protection
• Water based product

Application:

• PROPACO SP3 can be applied by spray gun or by means of a varnishing brush/roller
• The application equipment must be clean, dry and cleared of oil or solvent contamination.
• The substrates to be protected must be degreased and dried.
• PROPACO SP3 is ready for use. After a period in storage, it is advisable to shake to obtain complete homogenisation.
• It can be applied by classic, HVLP or airless spray gun. 30 to 40 dry microns may be applied by coat.
• Before drying , the application equipment should be cleaned with clear water. After polymerisation, use either SYNCLAIR A/C (20 %), or DIESTONE DLS.