Quick View
£121.53

Robnor product MP313C is a one component, air-drying solvent-based varnish.

 See Options
Bulk discounts
5+
£121.53 + VAT
400+
£115.45 + VAT
800+
£112.42 + VAT
1600+
£109.38 + VAT
Basket
Skip to main content
  • basket icon Order & Quote Functionality
  • door icon No Minimum Order Value
  • paper icon Technical Document Library

Robnor ResinLab MP313C Varnish 5Lt Can

Silmid P/N: MP313C05LT
£121.53 (excl VAT) £145.84 (Inc VAT)
In Stock - 5 Available
Please order in multiples of 5
Bulk discounts
5+
£121.53 + VAT
400+
£115.45 + VAT
800+
£112.42 + VAT
1600+
£109.38 + VAT

Robnor product MP313C is a one component, air-drying solvent-based varnish.

Technical Information

  • UN Number 1993 CL3
  • Commodity Code 32099000
  • Country of Origin United Kingdom

Data Sheets

Download the Resinlab MP313C technical data sheet (TDS) and the Resinlab MP313C safety data sheet (SDS) from Silmid today. Once you have logged in or signed up, the datasheet will be visible for download if one is available.

Product Properties

Pack Size
5Lt Can
Product Colour
Amber
Brand
Robnor ResinLab
Manufacturer Name
Robnor ResinLab Limited

Product Information

MP313C is a one component, air-drying solvent-based varnish. MP313C has been designed for application by dipping. Best results will be obtained by use of PCB dipping machine, such as that produced by Robnor Resins. Coating of suitable, even thickness requires a slow steady withdrawal from the dipping bath - thus difficult to achieve by hand dipping. If the PCB has a number of large standoff units this may necessitate a draining step in the dipping cycle. The thickness of varnish applied may be varied with the limits by altering the speed of withdrawal from the bath - the slower the withdrawal, the thinner the coat.

Attempting to apply too thick a coat in one stage may result in sagging or wrinkling. If a thick coat is required, this is best achieved via two thin coats - the first coat must be thoroughly cured before the second is applied. In all cases before the application of the coating thorough cleaning and drying is essential. Immediately before PCB assemblies are conformally coated all flux residues and other surface contaminants should be removed. If practicable a cleanliness level better than 1.5-gNaCl/cm2 salt weight equivalents should be achieved. The material will dry to give a tough hard-working insulating varnish when cured at room temperature; however, superior properties will be obtained if cured at elevated temperatures.

A suggested cure schedule is 8hours @ 80°C. This material is normally supplied at a dilution that should give a coating thickness in the region of 35¬m, however this can be altered by changes to application procedures. In some applications thinning of the material may be required e.g. spraying. In such instances TS109 Thinners should be used.

Shipping information

Orders over £100 placed online will now qualify for FREE UK Mainland delivery*

**orders placed through the office will incur additional charges.** 

International delivery (door to door delivery) is available for selected countries worldwide. Shipping will be automatically calculated based on the weight, location and hazardous nature of the goods. Customers can also choose ex works to arrange their own collection.

Please refer to our delivery page for more information.