AeroShell Fluid 3 General Purpose Mineral Lubricating Oil 1USG Can *MIL-PRF-7870E
AeroShell Fluid 3 is a general purpose mineral lubricating oil recommended for general lubrication of aircraft parts that require a light oil with good low temperature characteristics and a low freezing point.
Technical Information
- Commodity Code 27101981
- Country of Origin United States
Data Sheets
Download the AeroShell Fluid 3 technical data sheet (TDS) and the AeroShell Fluid 3 safety data sheet (SDS) from Silmid today. Once you have logged in or signed up, the datasheet will be visible for download if one is available. Please login to access datasheetsProduct Properties
Specifications
Please Note: Specifications and approvals are subject to change at any time. Users should always consult their AMM or the OEM when selecting products to ensure items have the release needed. Only specifications listed on the order confirmation will be certified on the Silmid CofC.
Product Information
AeroShell Fluid 3 is inhibited against oxidation and corrosion. It is a relatively low viscosity product with good resistance to evaporation.
Applications:
AeroShell Fluid 3 is recommended for general lubrication of aircraft parts that require a light oil, e.g. hinges, pivot joints, shaft joints, linkage pins and bearings, pulleys, cables, camera mechanisms, radio and radar gear and instruments. AeroShell Fluid 3 is normally applied by means of an oil can or brush. For this reason it is also described as 'an oilcan lubricant'.
Operating temperature range of AeroShell Fluid 3 is –54°C to +121°C (–65°F to 250°F).
For high temperature applications where no provision is made for frequent relubrication the synthetic oil, AeroShell Fluid 12, should be used in place of the mineral oil, AeroShell Fluid 3; however in this case care should be taken to ensure that there is no incompatibility between AeroShell Fluid 12 and seals, paints etc.
Additional Content
Shipping information
Please refer to our delivery page for more information.