Ardrox 2330 Seal Carbon & Paint Remover 25Lt Pail
Ardrox 2330 Seal is a mixture of solvents, activators and corrosion inhibitors suitable for top up of the separately sold Ardrox 2330.
Technical Information
- Commodity Code 27101999
- Country of Origin France
Data Sheets
Download the Ardrox 2330 technical data sheet (TDS) and the Ardrox 2330 safety data sheet (SDS) from Silmid today. Once you have logged in or signed up, the datasheet will be visible for download if one is available. Please login to access datasheetsProduct Properties
Specifications
Please Note: Specifications and approvals are subject to change at any time. Users should always consult their AMM or the OEM when selecting products to ensure items have the release needed. Only specifications listed on the order confirmation will be certified on the Silmid CofC.
Product Information
The Ardrox 2330 system consists of two layers, the upper layer being an oil seal which minimizes evaporation of the solvents in the lower, active paint removing layer. Ardrox 2330 contains no pyrrolidone, chlorinated solvents, phenolic compounds or heavy metals and will remove a wide range of paint schemes including stove acrylics, epoxies, polyurethanes and phenolics. It will also remove carbon or carbonaceous deposits, polymerized gum and lacquer deposits.
Processes:
- Immersion - Immerse dry components to be stripped in Ardrox 2330 in the lower layer until paint or carbon deposits have become fully softened or detached.
- Drain - Drain components (over Ardrox 2330 tank) for approximately one minute.
- Immersion - Immersion of components in a suitable Ardrox cleaner at recommended parameters to remove residues from the paint removal process.
- Pressure Rinse - Pressure rinse components. The use of an Air/Water Gun or high pressure water rig is recommended.
- Dry - Dry components thoroughly using compressed air (or an air recirculation oven at 40-80 °C / 140-176 °F).
Additional Content
Shipping information
Please refer to our delivery page for more information.