Tectyl 900 Corrosion Preventative Compound 1USQ Can *MIL-PRF-32033A Type 1 Amendment 1
TECTYL 900 is a solvent cutback, water displacing, low viscosity lubricating oil and corrosion preventive compound.
Technical Information
- Commodity Code 38119000
- Country of Origin United States
Data Sheets
Download the Tectyl 900 technical data sheet (TDS) and the Tectyl 900 safety data sheet (SDS) from Silmid today. Once you have logged in or signed up, the datasheet will be visible for download if one is available. Please login to access datasheetsProduct Properties
Specifications
Please Note: Specifications and approvals are subject to change at any time. Users should always consult their AMM or the OEM when selecting products to ensure items have the release needed. Only specifications listed on the order confirmation will be certified on the Silmid CofC.
Product Information
Tectyl 900 meets Federal Specification MIL-PRF-32033, QPL Reference Number LP-7050, and it provides protection to ferrous and non-ferrous industrial parts during storage and covered transit.
The maximum performance of Tectyl900 can be achieved only when the metal surfaces to be protected are clean, dry and free of rust, oil and mill scale. Daubert Chemical Company recommends that the metal substrate temperature be 50-95F (10-35C) at the time of product application.
Tectyl 900 is formulated to be used as supplied. Ensure uniform consistency prior to use. Continued stirring is generally not required. If the product thickens due to cold storage or loss of solvent during use, contactDaubert Chemical Company. DO NOT THIN Tectyl900. Incorrect thinning will affect film build, dry time and product performance. Daubert Chemical Company recommends that the ambient and product temperature be 50 - 95F (10 - 35C) at time of application. Tectyl900 can be spray or dip applied.
Shipping information
Please refer to our delivery page for more information.