Quick View
$835.40

Ardrox 2302 is a mixture of solvents, activators and corrosion inhibitors.

 See Options
Bulk discounts
1+
$835.40 + VAT
4+
$793.64 + VAT
8+
$772.74 + VAT
16+
$751.86 + VAT

Do You Need?

Basket
Skip to main content
  • basket icon Order & Quote Functionality
  • door icon No Minimum Order Value
  • paper icon Technical Document Library

Ardrox 2302SA Solvent Additive 25Lt Pail

Silmid P/N: A2302SA25L
$835.40 (excl VAT) $835.40 (Inc VAT)
No Stock - Standard lead time 45 business days
Bulk discounts
1+
$835.40 + VAT
4+
$793.64 + VAT
8+
$772.74 + VAT
16+
$751.86 + VAT

Do You Need?

Ardrox 2302 is a mixture of solvents, activators and corrosion inhibitors.

Technical Information

  • Commodity Code 38140090
  • Country of Origin France

Data Sheets

Download the Ardrox 2302SA Solvent Additive 25Lt Pail technical data sheet (TDS) and the Ardrox 2302SA Solvent Additive 25Lt Pail safety data sheet (SDS) from Silmid today. Once you have logged in or signed up, the datasheet will be visible for download if one is available.

Product Information

Ardrox 2302SAis a mixture of solvents, activators and corrosion inhibitors. It consists of two layers: an upper layer oil seal to prevent evaporation of the active paint removing solvents in the lower layer. Ardrox 2302SAcontains no phenolic compounds, aromatic solvents or heavy metals.

Ardrox 2302SAwill remove a wide range of paint schemes including baked acrylics, epoxies, polyurethanes, and phenolics. It will also remove carbon or carbonaceous deposits, polymerized gum and lacquer deposits.

Application:

Ardrox 2302SAis used as supplied. The total content of the container must be emptied into the tank. The recommended operating temperature range is 80 - 110°C (176 - 230°F). The product may be used for short periods at higher temperatures up to a maximum of 140°C (284°F) for removal of more obdurate finishes. In all cases, ensure, that the seal is properly maintained and all local regulations complied with, considering the 108°C (228°F) flash point of the lower layer.

  • Immersion - Immerse dry components to be stripped in Ardrox 2302SAin the lower layer until paint or carbon deposits have become fully softened or detached.
  • Drain - drain components (over Ardrox 2302SAtank) for approximately one minute.
  • Immersion - Immerse components in an Ardrox primary cleaner at 10% by volume at room to reduce vapors and aid subsequent pressure rinsing.
  • Pressure rinse - Pressure rinse components. The use of an Air/Water Gun or high pressure water rig is recommended.
  • Dry - Dry components thoroughly using compressed air (or an air recirculation oven at 40- 80°C / 140 - 176°F).

Approvals:

  • CFMI - CFM56
  • GE Aviation - SPM 70-80-04
  • IAE - V2500
  • Pratt Whitney - SPM 70-12-00
  • Rolls Royce - CSS 235 OMat 1/226
  • SNECMA - DMR 70-129

Conformances:

  • USAF - MIL-PRF-83936C
  • Messier/Bugatti/Dowty - PCS 2700°F
  • ASTM = ASTM F-519

Physical Chemical Properties:

  • Appearance - pale straw-colored, diphase liquid
  • Density (typical) g/ml 1.05 to 1.07 @ 20°C (68°F)
  • Flash Point (upper layer) °C (°F) 190 (374) Cleveland Open Cup
  • Flash Point (lower layer) °C (°F) 108 (228) Cleveland Open Cup

Shipping information

International delivery (door to door delivery) is available for selected countries worldwide. Shipping will be automatically calculated based on the weight, location and hazardous nature of the goods. Customers can also choose ex works to arrange their own collection.

Please refer to our delivery page for more information.