Please note - Due to high volume of orders and shipments, Silmid UK standard despatch are operating at 2-3 days order to shipping service; if required priority shipping services are still available.
AeroShell Fluid 3 General Purpose Mineral Lubricating Oil
AeroShell Fluid 3 is approved to DEF STAN 91-47 and MIL-PRF-7870 (previously MIL-L-7870). It is a general purpose mineral lubricating oil with good low temperature characteristics and a low freezing point.
Data SheetsPlease login and select to access Datasheets
It is inhibited against oxidation and corrosion. AeroShell Fluid 3 is a relatively low viscosity product with good resistance to evaporation. AeroShell Fluid 3 is recommended for general lubrication of aircraft parts that require a light oil, e.g. hinges, pivot joints, shaft joints, linkage pins and bearings, pulleys, cables, camera mechanisms, radio and radar gear and instruments.
AeroShell Fluid 3 is normally applied by means of an oil can or brush. For this reason it is also described as an oilcan lubricant. Operating temperature range of AeroShell Fluid 3 is °54°C to +121°C. For high temperature applications where no provision is made for frequent re-lubrication the synthetic oil, AeroShell Fluid 12, should be used in place of the mineral oil, AeroShell Fluid 3; however in this case care should be taken to ensure that there is no incompatibility between AeroShell Fluid 12 and seals, paints etc.
- Low viscosity product
- Good resistance to evaporation
- For general lubrication of aircraft parts
- Operating temperature : 54°C to +121°C.
Specifications: DEF STAN 91-47 MIL-PRF-7870F O-142 OM-12
International delivery (door to door delivery) is available for selected countries worldwide. Shipping will be automatically calculated based on the weight, location and hazardous nature of the goods. Customers can also choose ex works to arrange their own collection.
Please refer to our delivery page for more information.