Quick View
€767.92

Ardrox 2302 is a mixture of solvents, activators and corrosion inhibitors.

 See Options
Remises sur volume
1+
€767.92 + TVA
4+
€729.53 + TVA
8+
€710.32 + TVA
16+
€691.12 + TVA

As-tu besoin?

Panier
Skip to main content
  • basket icon Fonctionnalité de commande et de devis
  • door icon Pas de valeur minimale de commande
  • paper icon Bibliothèque de documents techniques

Ardrox 2302SA Solvent Additive 25Lt Pail

Silmid P/N: A2302SA25L
€767.92 (hors TVA) €921.50 (TVA comprise)
Pas de stock - Délai de livraison standard 45 jours ouvrables
Remises sur volume
1+
€767.92 + TVA
4+
€729.53 + TVA
8+
€710.32 + TVA
16+
€691.12 + TVA

As-tu besoin?

Ardrox 2302 is a mixture of solvents, activators and corrosion inhibitors.

Technical Information

  • Code des marchandises 38140090
  • Pays d'origine France

Data Sheets

Téléchargez dès aujourd'hui la fiche technique (TDS) du produit Ardrox 2302SA Solvent Additive 25Lt Pail ainsi que la fiche de données de sécurité (SDS) du produit Ardrox 2302SA Solvent Additive 25Lt Pail depuis Silmid. Une fois que vous vous êtes connecté(e) ou inscrit(e), la fiche technique sera visible et téléchargeable.

Informations produits

Ardrox 2302SAis a mixture of solvents, activators and corrosion inhibitors. It consists of two layers: an upper layer oil seal to prevent evaporation of the active paint removing solvents in the lower layer. Ardrox 2302SAcontains no phenolic compounds, aromatic solvents or heavy metals.

Ardrox 2302SAwill remove a wide range of paint schemes including baked acrylics, epoxies, polyurethanes, and phenolics. It will also remove carbon or carbonaceous deposits, polymerized gum and lacquer deposits.

Application:

Ardrox 2302SAis used as supplied. The total content of the container must be emptied into the tank. The recommended operating temperature range is 80 - 110°C (176 - 230°F). The product may be used for short periods at higher temperatures up to a maximum of 140°C (284°F) for removal of more obdurate finishes. In all cases, ensure, that the seal is properly maintained and all local regulations complied with, considering the 108°C (228°F) flash point of the lower layer.

  • Immersion - Immerse dry components to be stripped in Ardrox 2302SAin the lower layer until paint or carbon deposits have become fully softened or detached.
  • Drain - drain components (over Ardrox 2302SAtank) for approximately one minute.
  • Immersion - Immerse components in an Ardrox primary cleaner at 10% by volume at room to reduce vapors and aid subsequent pressure rinsing.
  • Pressure rinse - Pressure rinse components. The use of an Air/Water Gun or high pressure water rig is recommended.
  • Dry - Dry components thoroughly using compressed air (or an air recirculation oven at 40- 80°C / 140 - 176°F).

Approvals:

  • CFMI - CFM56
  • GE Aviation - SPM 70-80-04
  • IAE - V2500
  • Pratt Whitney - SPM 70-12-00
  • Rolls Royce - CSS 235 OMat 1/226
  • SNECMA - DMR 70-129

Conformances:

  • USAF - MIL-PRF-83936C
  • Messier/Bugatti/Dowty - PCS 2700°F
  • ASTM = ASTM F-519

Physical Chemical Properties:

  • Appearance - pale straw-colored, diphase liquid
  • Density (typical) g/ml 1.05 to 1.07 @ 20°C (68°F)
  • Flash Point (upper layer) °C (°F) 190 (374) Cleveland Open Cup
  • Flash Point (lower layer) °C (°F) 108 (228) Cleveland Open Cup

Shipping information

Livraison internationale (livraison de porte à porte) estdisponible pour certains pays dans le monde entier.Livraison sera automatiquement calculé sur le poids,l’emplacement et la nature dangereuse des marchandises.Les clients peuvent également choisir à l’usine d’organiserleur propre collection. 

Veuillez vous reporter à notre page de livraison pour plusd’informations.