Bostik Born2Bond GA-74 Gasketing Compound
Bostik Born2Bond Gasketing anaerobic adhesives are a single-component, cost effective alternative to conventional pre-formed gaskets on metal flanges.
Data Sheets
Téléchargez dès aujourd'hui la fiche technique (TDS) du produit Bostik Born2Bond GA-74 Gasketing Compound ainsi que la fiche de données de sécurité (SDS) du produit Bostik Born2Bond GA-74 Gasketing Compound sur Silmid. Une fois que vous vous êtes connecté(e) ou inscrit(e), sélectionnez la taille du produit qui vous intéresse et la fiche technique sera disponible en téléchargement. Please login and select to access DatasheetsInformations produits
Flexible, durable and resistant to wear and tear, they can be used during installation or for preventative maintenance. Achieving 100% surface-to-surface contact, the adhesives create a cohesive, durable connection that can withstand vibration, extreme temperatures and exposure to oils, solvents and water.
They also offer better stress distribution and, unlike traditional gaskets, do not require any bedding-in. GA-74 is an instant anaerobic gasketing material with high viscosity and medium strength. It is recommended for use on rigid iron, steel and aluminum flanges. Once cured the product prevents leakage and/or loosening of parts from vibration and shock.
Features:
- Medium strength
- High viscosity
- Fluorescenic
- Instant low pressure seal
- Outstanding fatigue strength
- Vibration resistant
- Corrosion prevention
- Prevents sagging and micro-movement
- Higher power transmission
- Single component
- Suitable for active and passive metals
- High pressure seal - 350bar
Directions For Use:
- For best results, clean all surfaces (internal and external) with Born2BondTM - Pre-Bonding Cleaner and wait until fully evaporated.
- The product is designed for close fitting flanged parts with gaps up to 0.25mm.
- Apply manually as a continuous bead or by screen-printing to one surface ofthe flanges.
- If the cure speed is too slow, use Born2BondTM Anaerobic Activator.
- Engines and powertrains
- Pumps and compressors
- Storage of liquids and gas
- Gearboxes and transmissions
- Tighten flanges after application.
- Cured product can be removed by using of Born2BondTM Gasket Adhesive Remover and a soft scraper.
- Finish the cleaning process with a Born2BondTM Pre-bondingCleaner soaked soft cloth.
Method Of Use:
- Manual: Directly from the bottle with or without dispensing tips formore precise dispensing.
- Semi-Automated: Use of pressure-time systems for accurate
- volume and larger series.
- Full-Automated: fully automated robot or application lines.
Applications:
- Engines and powertrains
- Pumps and compressors
- Storage of liquids and gas
- Gearboxes and transmissions
Shipping information
Veuillez vous reporter à notre page de livraison pour plusd’informations.