Quick View

Naftoseal MC-238 Class A is a two-component, manganese-dioxide cured polysulfide polymer system providing excellent fuel tank and fuselage seals. A-2 denotes that this product has a 2 hour application time.

 See Options
Panier
Skip to main content
  • basket icon Fonctionnalité de commande et de devis
  • door icon Pas de valeur minimale de commande
  • paper icon Bibliothèque de documents techniques

Naftoseal MC-238 Class A-2 Fuel Tank & Fuselage Sealant

Silmid P/N: VAR0000994
De €52.40 (hors TVA) €62.88 (TVA comprise)
Loading Variations

Naftoseal MC-238 Class A is a two-component, manganese-dioxide cured polysulfide polymer system providing excellent fuel tank and fuselage seals. A-2 denotes that this product has a 2 hour application time.

Data Sheets

Téléchargez dès aujourd'hui la fiche technique (TDS) du produit Naftoseal MC-238 Class A-2 Fuel Tank & Fuselage Sealant ainsi que la fiche de données de sécurité (SDS) du produit Naftoseal MC-238 Class A-2 Fuel Tank & Fuselage Sealant sur Silmid. Une fois que vous vous êtes connecté(e) ou inscrit(e), sélectionnez la taille du produit qui vous intéresse et la fiche technique sera disponible en téléchargement.

Informations produits

It has outstanding resistance to aviation gasoline and jet fuel, as well as resistance to the chemicals and petroleum products used in the aircraft industry.

Naftoseal MC-238 Class A maintains its flexibility and bond strength on most metal substrates like aluminium, stainless steel, steel, titanium, composite and many coatings under extremes of temperature, weathering and stress. The mixed compound is a pourable, slightly thixotropic paste easily applied by extrusion, injection gun, spatula or brush and it has excellent tooling properties.

The curing time may be reduced considerably by increasing the temperature (up to 60 °C / 140 °F max).

Surface Preparation:

To obtain good adhesion, clean surfaces with appropriate cleaners (e.g. Chemetall's Ardrox products like Ardrox 5529 or Ardrox 5575) to remove dirt, grease and processing oils just prior to sealant application. Use lint-free rags or paper towels that are free of oil. Always pour cleaner on the cloth to avoid contamination of the cleaner supply. Clean one small area at a time, quickly wiping it dry before the cleaner's solvent evaporates to prevent redeposition of oil, wax or other contaminants. Usually, in the case of most epoxy resin primers, surfaces need not be additionally prepared with an adhesion promoter to improve adhesion. PUR and EP topcoats as well as composite components should be pre-treated by the Naftoseal MC-110 Adhesion Promoter.

Shipping information

Livraison internationale (livraison de porte à porte) estdisponible pour certains pays dans le monde entier.Livraison sera automatiquement calculé sur le poids,l’emplacement et la nature dangereuse des marchandises.Les clients peuvent également choisir à l’usine d’organiserleur propre collection. 

Veuillez vous reporter à notre page de livraison pour plusd’informations.