Cho-Bond 1016/1086 Corrosion Resistant Electrically Conductive Sealant 2.5oz Kit

The minimum recommended bond line for CHO-BOND 1016 is 0.007 inches (0.18mm). In addition, CHO-BOND 1016 may be used for EMI gasket repair, bonding, and attachment in applications where moderate lap shear strength (150 psi) is required. The nickel-plated graphite filler provides good galvanic corrosion resistance for applications with aluminium as the mating substrate. Its minimal shrinkage and lack of VOCs makes it a good choice for a variety of commercial and military applications.

CHO-BOND 1016's moisture-cure silicone polymer system allows it to cure to the touch in 24hrs and provides a flexible and resilient conductive and environmental seal over a wide range of application temperatures. CHO-BOND 1016's nickel-plated graphite filler offers good EMI shielding for enclosures where both RF fields must be excluded, and internal radiated emissions attenuated.

CHO-BOND 1016 should be used in conjunction with CHOSHIELD 1086 primer (supplied in this kit) for best adhesion results. Typical applications include man portable electronics, radar and communication systems, EMI vents, military ground vehicles, and shelters.