AeroShell Fluid 3 General Purpose Mineral Lubricating Oil 1USG Can *MIL-PRF-7870E
AeroShell Fluid 3 is a general purpose mineral lubricating oil recommended for general lubrication of aircraft parts that require a light oil with good low temperature characteristics and a low freezing point.
Technical Information
- Code des marchandises 27101981
- Pays d'origine United States
Data Sheets
Téléchargez dès aujourd'hui la fiche technique (TDS) du produit AeroShell Fluid 3 General Purpose Mineral Lubricating Oil 1USG Can ainsi que la fiche de données de sécurité (SDS) du produit AeroShell Fluid 3 General Purpose Mineral Lubricating Oil 1USG Can depuis Silmid. Une fois que vous vous êtes connecté(e) ou inscrit(e), la fiche technique sera visible et téléchargeable. Veuillez vous connecter afin d’avoir accès aux fiches techniquesInformations produits
AeroShell Fluid 3 is inhibited against oxidation and corrosion. It is a relatively low viscosity product with good resistance to evaporation.
Applications:
AeroShell Fluid 3 is recommended for general lubrication of aircraft parts that require a light oil, e.g. hinges, pivot joints, shaft joints, linkage pins and bearings, pulleys, cables, camera mechanisms, radio and radar gear and instruments. AeroShell Fluid 3 is normally applied by means of an oil can or brush. For this reason it is also described as 'an oilcan lubricant'.
Operating temperature range of AeroShell Fluid 3 is –54°C to +121°C (–65°F to 250°F).
For high temperature applications where no provision is made for frequent relubrication the synthetic oil, AeroShell Fluid 12, should be used in place of the mineral oil, AeroShell Fluid 3; however in this case care should be taken to ensure that there is no incompatibility between AeroShell Fluid 12 and seals, paints etc.
Shipping information
Veuillez vous reporter à notre page de livraison pour plusd’informations.