Skip to main content

Sandstrom 9A Solid Film Lubricant 1USQ Can *SAE AS5272 Type II

Sandstrom 9A Solid Film Lubricant 1USQ Can *SAE AS5272 Type II
SAND9A1USQ
Sandstrom 9A dry film lubricant is a paint like coating containing molybdenum disfulside and corrosion inhibiting pigments, This heat curing material prevents corrosion, galling, seizing and fretting Lire la suite
€182.44 hors TVA
(€218.93 TVA comprise)
1 En stock
Remises sur volume
1+
€182.44 + TVA
12+
€173.32 + TVA
24+
€168.75 + TVA
48+
€164.19 + TVA

Informations produits

Sandstrom 9A should be applied where maximum wear life and corrosion protection from a dry film lubricant are required. Sandstrom 9A may be applied by brush, dip or spray method to a wide variety of surfaces. After it is heat cured, 9A is virtually unaffected by atmospheric and fretting corrosion, solvents, acids, oils or degreasers and is not re-softened at elevated temperatures.

Features

  • ? Excellent Corrosion Protection
  • ? Chemical Resistance
  • ? Long Wear Life
  • ? 9A CONTAINS NO GRAPHITE

Typical uses

Sandstrom 9A is an excellent solution to the problem of lubricating parts:

  • ? That will be operated in corrosive atmospheres.
  • ? That may be stored for long periods.
  • ? That are seldom lubricated once they leave the factory and permanent lubrication is desired.
  • ? Where operating pressures exceed the load-bearing capacities of ordinary oils and greases.
  • ? Where ""clean operation"" is desired (does not collect dirt and debris like grease and oils).
  • ? Where a protective coating and sacrificial break-in lubricant is needed.
  • ? Where fretting and galling is a problem (e.g., splines, universal joints, keyed bearings).
  • ? Where easy release is desired (e.g., fasteners, PVC molds).
  • ? Where parts may be subjected to frequent disassembly.

Limitations

Do not use 9A where there is potential for contact with liquid oxygen or food.

Specifications and Information

Technical Information

€182.44 hors TVA
(€218.93 TVA comprise)
1 En stock
Code produit
SAND9A1USQ
Commodity Code
34039900
Country Of Origin
United States
Code UN
UN1263 CL3 II

des documents

Sil-Mid Limited NE GARANTIT PAS que les informations figurant sur cette page sont les informations les plus récentes disponibles auprès du fabricant, il y a des moments où les informations mises à jour sont publiées et nous ne sommes pas mis au courant immédiatement.

Delivery information

Livraison internationale (livraison de porte à porte) estdisponible pour certains pays dans le monde entier.Livraison sera automatiquement calculé sur le poids,l’emplacement et la nature dangereuse des marchandises.Les clients peuvent également choisir à l’usine d’organiserleur propre collection. 


Veuillez vous reporter à notre page de livraison pour plusd’informations.