HumiSeal 1B31 PB 65 CPS Pre Blended Acrylic Conformal Coating 5Lt Can
A fast air drying, single component, acrylic pre-blended coating providing excellent moisture and environmental protection for printed circuit assemblies.
Technical Information
- Code UN 1263 CL3
- Code des marchandises 32082090
- Pays d'origine United Kingdom
Data Sheets
Téléchargez dès aujourd'hui la fiche technique (TDS) du produit HumiSeal 1B31 PB 65 CPS Pre Blended Acrylic Conformal Coating 5Lt Can ainsi que la fiche de données de sécurité (SDS) du produit HumiSeal 1B31 PB 65 CPS Pre Blended Acrylic Conformal Coating 5Lt Can depuis Silmid. Une fois que vous vous êtes connecté(e) ou inscrit(e), la fiche technique sera visible et téléchargeable. Veuillez vous connecter afin d’avoir accès aux fiches techniquesInformations produits
Cleanliness of the substrate is of extreme importance for the successful application of a conformal coating. Surfaces must be free of moisture, dirt, wax, grease and all other contaminants. Contamination under the coating will cause problems, which may lead to assembly failures.
HumiSeal 1B31 Pre-blends are specifically diluted to a viscosity for immediate use. No additional dilution is required. Customers should establish which pre-blend is suitable for their equipment and application method before commercial use.
1B31 is a fast drying, single component, acrylic conformal coating that provides excellent moisture and environmental protection for printed circuit assemblies. 1B31 is also produced as pre-blended products, at a range of viscosities, suitable for a variety of applications. HumiSeal 1B31, and its Pre-blends, demonstrate excellent flexibility, fluoresce under UV light for ease of inspection and are easily repairable.
HumiSeal 1B31 coating is MIL-I-46058C qualified, IPC-CC-830 and RoHS Directive 2011/65/EU compliant. After complete cure, the properties of HumiSeal 1B31 Pre-Blends and HumiSeal 1B31 are comparable.
Shipping information
Veuillez vous reporter à notre page de livraison pour plusd’informations.