ThreeBond TB1375B High Temperature Retainer 50gm Bottle

Three Bond 1375B cures spontaneously when sealed off from contact with the air between close fitting metallic surfaces and inhibit the development of rust, leaks, corrosion and are not affected by oils, chemicals, salt water, various gases or solvents.

Features of 1375 B:

• High strength locking and sealing of fitted parts such as bearings, gears and pulleys onto shafts
• For retaining cylinder linings, bushes and tubes into castings
• Allows the use of slip fits instead of press and interference fits
• Eases assembly by aiding bearings and bushes to find alignment points
• Prevents fretting and corrosion by completely sealing against oil, water and most chemicals
• Excellent vibration resistance

Applications:

• After selecting the correct grade of ThreeBond thread lock, remove all dirt and oil. Parts must be clean
• Apply ThreeBond thread lock to mating surfaces
• Assemble immediately
• Allow specified fixture time before disturbing the parts
• Use primer TB3095C to improve cure speed and ensure curing in larger than specified gaps