3M 8999K11 Rotor Blade Protection Kit
The components in this kit may be used to protect the leading edge of rotor blades on heavy lift helicopters. This application uses 8-inch wide tape cut into lengths of 36 inches to cover the leading edge of the outer 3/4 of the blade. A second layer of 2-inch wide tape is applied in 36-inch long strips over the top of the 8-inch wide tape to act as a sacrificial layer on the leading edge.
Technical Information
- Code UN 3175 CL4.1
- Code des marchandises 39199080
- Pays d'origine United States
Data Sheets
Téléchargez dès aujourd'hui la fiche technique (TDS) du produit 3M 8999K11 ainsi que la fiche de données de sécurité (SDS) du produit 3M 8999K11 depuis Silmid. Une fois que vous vous êtes connecté(e) ou inscrit(e), la fiche technique sera visible et téléchargeable. Veuillez vous connecter afin d’avoir accès aux fiches techniquesProduct Properties
Specifications
spec_table_disclaimer
Informations produits
Kit Components:
- 3M Polyurethane Protective Tape 8663 Matte Black (2" x 36") 72 each
- 3M Polyurethane Protective Tape 8663 Matte Black (8" x 36") 72 each
- 3M Protective Tape Application Solution 6 quarts
- 3M Protective Tape Cleaning Wipes (30/pouch) 6 pouches
- 3M Scotch-Weld Epoxy Adhesive DP190 Gray 24 tubes
- 3M Scotch-Weld EPX Mixing Nozzles 48 each
- 3M Scotch-Weld EPX Applicator 1 each
- 3M Scotch-Weld EPX Plunger (1:1) 1 each
- 3M Adhesion Promoter 86A Wipes (5/packet) 6 packets
- 3M Air Release Tool 3 each
- 3M Imperial Wetordry 320 Sandpaper 10 each
- 3M Vinyl Tape 471 – 1 inch width (for masking) 6 rolls
- Scotch-Brite General Purpose Pad 7447 10 each
- Yellow Squeegees 4 each
- Shop Towels 48 each
- Nitrile Rubber Gloves Size Large 6 pairs
- Scissors 1 each
- Training CD 1 each
Additional Content
Shipping information
Veuillez vous reporter à notre page de livraison pour plusd’informations.