Quick View
Código de producto: A2302SA25L
€787.03

Ardrox 2302 is a mixture of solvents, activators and corrosion inhibitors.

 See Options
Descuentos por volumen
1+
€787.03+ IVA
2+
€747.68+ IVA
4+
€728.00+ IVA
8+
€708.32+ IVA
Cesta
Skip to main content
  • basket icon Funciones de pedido y presupuesto
  • door icon Sin valor mínimo de pedido
  • paper icon Biblioteca de documentos técnicos

Ardrox 2302SA Solvent Additive 25Lt Pail

Silmid P/N: A2302SA25L
€787.03 (IVA no incl.) €944.44 (IVA incl.)
No hay existencias - Plazo de entrega estándar 45 días laborables
Descuentos por volumen
1+
€787.03+ IVA
2+
€747.68+ IVA
4+
€728.00+ IVA
8+
€708.32+ IVA

Ardrox 2302 is a mixture of solvents, activators and corrosion inhibitors.

Technical Information

  • Código del producto 38140090
  • País de Origen France
DISTRIBUIDOR AUTORIZADO: Silmid es distribuidor autorizado de los productos Chemetall. Haga clic aquí para consultar nuestro certificado de distribuidor autorizado.

Data Sheets

Descarga hoy mismo la hoja técnica (TDS) del producto Ardrox 2302SA Solvent Additive 25Lt Pail y la hoja de datos de seguridad (SDS) del producto Ardrox 2302SA Solvent Additive 25Lt Pail desde Silmid. Una vez que hayas iniciado sesión o te hayas registrado, la hoja de datos será visible para su descarga.

Información del producto

Ardrox 2302SAis a mixture of solvents, activators and corrosion inhibitors. It consists of two layers: an upper layer oil seal to prevent evaporation of the active paint removing solvents in the lower layer. Ardrox 2302SAcontains no phenolic compounds, aromatic solvents or heavy metals.

Ardrox 2302SAwill remove a wide range of paint schemes including baked acrylics, epoxies, polyurethanes, and phenolics. It will also remove carbon or carbonaceous deposits, polymerized gum and lacquer deposits.

Application:

Ardrox 2302SAis used as supplied. The total content of the container must be emptied into the tank. The recommended operating temperature range is 80 - 110°C (176 - 230°F). The product may be used for short periods at higher temperatures up to a maximum of 140°C (284°F) for removal of more obdurate finishes. In all cases, ensure, that the seal is properly maintained and all local regulations complied with, considering the 108°C (228°F) flash point of the lower layer.

  • Immersion - Immerse dry components to be stripped in Ardrox 2302SAin the lower layer until paint or carbon deposits have become fully softened or detached.
  • Drain - drain components (over Ardrox 2302SAtank) for approximately one minute.
  • Immersion - Immerse components in an Ardrox primary cleaner at 10% by volume at room to reduce vapors and aid subsequent pressure rinsing.
  • Pressure rinse - Pressure rinse components. The use of an Air/Water Gun or high pressure water rig is recommended.
  • Dry - Dry components thoroughly using compressed air (or an air recirculation oven at 40- 80°C / 140 - 176°F).

Approvals:

  • CFMI - CFM56
  • GE Aviation - SPM 70-80-04
  • IAE - V2500
  • Pratt Whitney - SPM 70-12-00
  • Rolls Royce - CSS 235 OMat 1/226
  • SNECMA - DMR 70-129

Conformances:

  • USAF - MIL-PRF-83936C
  • Messier/Bugatti/Dowty - PCS 2700°F
  • ASTM = ASTM F-519

Physical Chemical Properties:

  • Appearance - pale straw-colored, diphase liquid
  • Density (typical) g/ml 1.05 to 1.07 @ 20°C (68°F)
  • Flash Point (upper layer) °C (°F) 190 (374) Cleveland Open Cup
  • Flash Point (lower layer) °C (°F) 108 (228) Cleveland Open Cup

Shipping information

Entrega internacional (entrega puerta a puerta) está disponible para países seleccionados en todo el mundo. Envío se calculan automáticamente basado en el peso, la ubicación y la naturaleza peligrosa de las mercancías. Los clientes también pueden elegir fábrica para arreglar su propia colección.