Quick View

Johnson Matthey A501 is a two part conductive adhesive.

 See Options
Panier
Skip to main content
  • basket icon Fonctionnalité de commande et de devis
  • door icon Pas de valeur minimale de commande
  • paper icon Bibliothèque de documents techniques

Johnson Matthey A501H 50gm (Freezer Storage -18°C)

Silmid P/N: A501H00050
Pas de stock - Délai de livraison standard 129 jours ouvrables

Johnson Matthey A501 is a two part conductive adhesive.

Technical Information

  • Code UN 3082 CL9
  • Code des marchandises 35069190
  • Pays d'origine United Kingdom

Data Sheets

Téléchargez dès aujourd'hui la fiche technique (TDS) du produit Johnson Matthey A501H 50gm (Freezer Storage -18°C) ainsi que la fiche de données de sécurité (SDS) du produit Johnson Matthey A501H 50gm (Freezer Storage -18°C) depuis Silmid. Une fois que vous vous êtes connecté(e) ou inscrit(e), la fiche technique sera visible et téléchargeable.

Informations produits

A501 will bond extremely well to most surfaces. Conductivity and adhesion performance is very good. The unmixed components have an excellent shelf life.

Typical Properties:

  • Typical Cured Properties
  • Volume Resistivity < 1000 µΩ.cm
  • Shear Adhesion Strength 2.2 kN (single-lap, 0.5 in2)
  • Maximum Service Temperature 100°C (continuous), 150°C (excursions)

Typical Physical Properties

  • Silver Content (resin) 70.0 wt%
  • Silver Content (hardener) 70.0 wt%
  • Shelf Life (resin) 6 months at 15 - 25°C
  • Shelf Life (hardener) 6 months at -18°C

Mixing & Application:

The adhesive is a 100% solids system, supplied in two parts. The two components should be weighed out in equal amounts onto a flat non-porous substrate, and mixed thoroughly with a flat blade for 4 minutes before use. All surfaces should be clean, dry and grease-free. Apply A501 to surfaces to be bonded, by spatula, palette knife or stylus pin.

Shipping information

Livraison internationale (livraison de porte à porte) estdisponible pour certains pays dans le monde entier.Livraison sera automatiquement calculé sur le poids,l’emplacement et la nature dangereuse des marchandises.Les clients peuvent également choisir à l’usine d’organiserleur propre collection. 

Veuillez vous reporter à notre page de livraison pour plusd’informations