Surf-Kote LOB-1800-G is recommended for use primarily on corrosion-resistant base metals as the corrosion properties of the coating are minimal.
Application of Surf-Kote LOB-1800-G should be performed as soon after surface preparation as practical. Surfaces to be coated should not be touched with bare hands or contaminated in any way. Surf-Kote LOB-1800-G should be thoroughly stirred prior to application as the lubricating pigments will settle during storage.If possible, preheat the parts to be coated to 200-250ï‚°F. Application of Surf-Kote LOB-1800-G to a warm substrate expedites the flash-off of the water solvent.
Surf-Kote LOB-1800-G should be applied to a thickness of.0005-.001 inch by spraying, dipping, or brushing, with spraying being the preferred method.
Normal paint spray equipment can be used. Air pressure of 20-40 psi is recommended.
Spray equipment should be thoroughly cleaned with water and dried after use.
Specifications and Information
Document DownloadsSil-Mid Limited DO NOT GUARANTEE that the information in these documents is the most up to date information available from the manufacturer, there are times when updated information is released and we are not made aware immediately.
Orders over £50 placed online will now qualify for FREE UK Mainland delivery*
Orders under £50 placed online for UK Mainland delivery is £8.00*
**Orders requiring Pre 10.00am Next Day delivery has also been lowered from £35.00 to £21.00, orders placed through the office will incur additional charges.**
International delivery (door to door delivery) is available for selected countries worldwide. Shipping will be automatically calculated based on the weight, location and hazardous nature of the goods. Customers can also choose ex works to arrange their own collection.
Please refer to our delivery page for more information.