Skip to main content

PPG PR1005 Clear 500ml Can PPG-AFS 1841A PPG-DTD900/4493

100500050
PPG PR1005 Clear 500ml Can PPG-AFS 1841A PPG-DTD900/4493
PR-1005 is a one-part synthetic rubber solution for use over a temperature range of -75°C to 120°C,ready for use as packed, as a protective coating for natural and synthetic rubbers where outstanding adhesion, general inertness and excellent resistance to all types of fuel are required. PR-1005 is a thin liquid, allowing for application by brush, fill and drain, or dipping. The compound cures at room temperature by the evaporation of solvent to form a smooth, tough, flexible, transparent film.
The following test have been run in accordance with MIL-S-4383
€35.70 hors TVA
€42.84 TVA comprise
8 En stock
Code UN: UN1133 CL3 II
Quantité limitée: 5L
Remises sur volume
1+
€35.70 + TVA
10+
€33.91 + TVA
20+
€33.02 + TVA
40+
€32.13 + TVA

Features

PPR-1005 is a thin liquid, allowing for application by brush, fill and drain, or dipping. The compound cures at room temperature by the evaporation of solvent to form a smooth, tough, flexible, transparent film.

Surface preparation
  • Immediately before applying PR-1005 to metallic, chemically treated, or painted substrates, the surfaces should be cleaned with solvents to remove contamination such as dirt, grease, and/or processing lubricants.
  • A progressive cleaning procedure should be employed using the appropriate solvents and new lint-free cloth (reclaimed solvents or tissue paper should not be used). Always pour the solvent on to the cloth to avoid contaminating the solvent supply. Wash one small area at a time. It is important that the surface is dried with second clean cloth prior to the solvent evaporating to prevent the redeposition of contaminants on to the substrate.
  • Substrate composition can vary greatly. This can affect sealant adhesion. It is recommended that adhesion characteristics to a specific substrate be determined prior to application on production parts or assemblies. For information on specific substrate treatment please refer to the Surface Treatment leaflet which is available on request.

Livraison internationale (livraison de porte à porte) estdisponible pour certains pays dans le monde entier.Livraison sera automatiquement calculé sur le poids,l’emplacement et la nature dangereuse des marchandises.Les clients peuvent également choisir à l’usine d’organiserleur propre collection. 


Veuillez vous reporter à notre page de livraison pour plusd’informations.