Quick View

Tensol 70 is a two part two component acrylic cement that hardens at room temperature by polymeristaion. It products high strength bonds to acrylic sheet and offers excellent weathering resistance.

 See Options
Remises sur volume
1+
€46.29 + TVA
12+
€43.98 + TVA
24+
€42.82 + TVA
48+
€41.66 + TVA

As-tu besoin?

Panier
Skip to main content
Continuer les achats Afficher le panier
  • basket icon Fonctionnalité de commande et de devis
  • door icon Pas de valeur minimale de commande
  • paper icon Bibliothèque de documents techniques
Accueil

EVO-STIK Tensol 70 Two Component Cement 525gm Kit

Silmid P/N: TENCE70500
EVO-STIK Tensol 70 Two Component Cement 525gm Kit
Remove From Favourites Ajouter aux Favoris
€46.29 (hors TVA) €55.55 (TVA comprise)
En stock - 11 disponibles
Remises sur volume
1+
€46.29 + TVA
12+
€43.98 + TVA
24+
€42.82 + TVA
48+
€41.66 + TVA

As-tu besoin?

Tensol 70 is a two part two component acrylic cement that hardens at room temperature by polymeristaion. It products high strength bonds to acrylic sheet and offers excellent weathering resistance.

Technical Information

  • Code UN 1133 CL3 / 3082 CL9
  • Code des marchandises 35069190
  • Pays d'origine United Kingdom

Data Sheets

Téléchargez dès aujourd'hui la fiche technique (TDS) du produit Tensol 70 Glue ainsi que la fiche de données de sécurité (SDS) du produit Tensol 70 Glue depuis Silmid. Une fois que vous vous êtes connecté(e) ou inscrit(e), la fiche technique sera visible et téléchargeable.

Informations produits

EVO-Stik TENSOL 70 is intended for cementing acrylic sheet to itself, but it will bond acrylic sheet to other materials such as wood. Applications include sign making, model making, structural engineering and acrylic sheet repair. Unsupported gaps of up to 1mm can be produced. EVO-Stik TENSOL 70 is not recommended for structural applications on aircraft.

Mix Ratio (By Weight):

  • Tensol 70 Component A 20 parts
  • Tensol 70 Component B 1 part

Instructions For Use:

  • Add Component B to Component A and mix thoroughly by stirring, taking care to entrap as little air in the adhesive as possible, after mixing cover the vessel and leave to stand for approx. 5 minutes to allow the larger bubbles to rise to the surface.
  • The mixed adhesive must be used and the job completed within 20 minutes of adding Component B, hardening begins as soon as Component B is added to Component A, if not used within 20 minutes it will be difficult to use due to thickening of the adhesive and the bond will be weakened.

Shipping information

Livraison internationale (livraison de porte à porte) estdisponible pour certains pays dans le monde entier.Livraison sera automatiquement calculé sur le poids,l’emplacement et la nature dangereuse des marchandises.Les clients peuvent également choisir à l’usine d’organiserleur propre collection. 

Veuillez vous reporter à notre page de livraison pour plusd’informations.