Spray applied high heat resisting aluminium filled coating, for use on engine components operating at up to 600°C (1,115°F) on 12% Chromium Steel, or 500°C (930°F) on low alloy steels which are subjected to harsh media such as phosphate ester based hydraulic fluids. Sacrificial on burnishing after curing.
£700.80 excl VAT
£840.96 inc VAT
No stock - lead time 38 days
UN Number: UN1263 CL3 III
£700.80 + VAT
£665.76 + VAT
£648.24 + VAT
£630.72 + VAT
- Surface Preparation:
Ensure that surfaces are totally clean and dirt free
Pre-Treatment: Typically de-grease then grit blast with 120/220 aluminium oxide. Surfaces must be dust free prior to coating.
- Paint Preparation:
Stir thoroughly before use. Can be mixed by rolling as required. If required can be thinned with up to 5% IP9151 thinner.
Apply by spray: apply one wet coat and allow to flash off for 15 minutes. Apply second wet coat, to give a film thickness of 40-100 microns. Allow to flash off for 15 minutes before curing.
- Drying Curing:
Pre-cure for 1 hour at 190°C (375°F); raise oven temperature to 540°C (1004°F) and cure for 2 hours
Orders over £50 placed online will now qualify for FREE UK Mainland delivery*
Orders under £50 placed online for UK Mainland delivery is £6.95*
Orders requiring Pre 10.00am Next Day delivery has also been lowered from £35.00 to £19.50**
International delivery (door to door delivery) is available for selected countries worldwide. Shipping will be automatically calculated based on the weight, location and hazardous nature of the goods. Customers can also choose ex works to arrange their own collection.
Please refer to our delivery page for more information.