The 7904 ink series is a two part semi-paste epoxy ink for application by direct or offset printing with plate or reservoir equipment onto substrates including glass, metals, and plastics.
UN Number: UN2259 CL8 II
Limited Quantity: 1L
This two part ink is sold in pre-measured units consisting of an A package and a B package. When the total amount of the A package is combined with the total amount of the B package (with both packages carrying the same series and color description) the required mixing ratio is maintained. Smaller quantities can be mixed using the weight ratio marked on the containers. Allow 20 to 30 minutes after mixing before use.
Cured prints of inks in this series have shown good resistance to the following conditions after application in accordance with MARKEM's recommended procedures:
- solvents, including methanol, ethanol, and those specified in MIL-STD-883 Method 2015 and MIL-STD-202 Method 215 (revision current at the time of testing).
- soaking in water and gasoline as described in Federal Specification TT-I-1795A.
- salt spray (20% solution) for 48 hours.
- 118Â° for 24 hours.
- abrasion (film thickness dependent).
Orders over £50 placed online will now qualify for FREE UK Mainland delivery*
Orders under £50 placed online for UK Mainland delivery is £6.95*
Orders requiring Pre 10.00am Next Day delivery has also been lowered from £35.00 to £19.50**
International delivery (door to door delivery) is available for selected countries worldwide. Shipping will be automatically calculated based on the weight, location and hazardous nature of the goods. Customers can also choose ex works to arrange their own collection.
Please refer to our delivery page for more information.
Document DownloadsSil-Mid Limited DO NOT GUARANTEE that the information on this page is the most up to date information available from the manufacturer, there are times when updated information is released and we are not made aware immediately.