Aeroshell Piston Engine Oil
W100 Plus
AeroShell Oil W100 Plus is a new single grade oil that combines the single grade, ashless dispersant performance found in AeroShell Oil W100 and the anti-wear/anti-corrosion additives of AeroShell Oil W15W-50 Multigrade. It’s the oil for pilots who prefer a single grade but who also want the extra protection and performance.
Applications
The advanced additives in AeroShell Oil W100 Plus provide better rust and wear protection than conventional single grades. The additives work as a protective barrier to prevent critical parts from being slowly degraded by rust or wear, especially when an aircraft sits idle.
This protection helps keep the camshaft and lifters coated, reducing the likelihood of premature damage and helping operators reach TBO.
AeroShell Oil W100 Plus Key Features
• Blended from selected high viscosity mineral base oils
• Contains AeroShell’s proven W Oils additive package
• Additional anti-wear additives (containing Lycoming additive LW 16702)
• Additional anti-corrosion additives
• Fully compatible with other approved aircraft piston engine oils
Specifications
Approved SAE J-1899 SAE Grade 50
AeroShell Oil W100 Plus already contains, in the correct proportions, an anti-wear additive equivalent to the Lycoming additive LW 16702; thus it already complies with FAA Airworthiness Directive 80-04-03. Operators who use AeroShell Oil W100 Plus DO NOT need to add this Lycoming additive to the oil. AeroShell Oil W100 Plus is qualified for use in all Teledyne Continental Motors liquid cooled and air cooled aircraft piston engines.
Equipment Manufacturers Approval
AeroShell Oil W100 Plus is approved for use by the following engine manufacturers:
| Textron Lycoming |
Service Bulletin 446C |
| Teledyne Continental |
SIL 99-2 |
| FAA Airworthiness Directive |
80-04-03R2 |
Typical Properties
| Grade |
W80 |
W100 |
| Colour ASTM |
- |
<3.0 |
| Density @ 15°C kg/l |
Report |
0.893 |
Kinematic Viscosity mm2/s @ 100°C
Kinematic Viscosity mm2/s @ 40°C |
16.3-21.9
Report |
19.96
195 |
| Viscosity Index |
95 min |
116 |
| Pourpoint °C |
-18 max |
-21 |
| Flashpoint Cleveland Open Cup °C |
243 min |
288 |
| Total Acidity mgKOH/g |
1.0 max |
0.02 |
| Sulphur % m |
1.0 max |
0.26 |
| Copper corrosion |
1 max |
1B |
| Ash content % m |
0.011 max |
0.002 |
>> Contact us with your requirements for Aeroshell Products.
Browse other Aeroshell Products
Other related products we supply
|
