AeroShell Lubricating Oils
Adhesives Sealants Cleaning Coatings Lubricants Silicones Composites Application Equipment
Product Search
Specification
Site Map
Whats New
Quick Help
Company Profile
Aeroshell
Ardrox
3M
Bostik
PRC DeSoto
Araldite
Loctite
Molykote
Air BP

AeroShell Lubricating Oils

AeroShell Fluid 1
AeroShell Fluid 1 is a light lubricating mineral oil containing, by specification, less than 0.10% mass stearic acid. For use as a lubricant where a light anti-freezing oil is required, e.g. on aircraft instruments, gun mounting buffers, hydraulic couplings, controls, door hinges, etc. Also used as a preservative oil for Stromberg carburetors and some fuel systems. AeroShell Turbine Oil 3 can be used as an alternative to AeroShell Fluid 1, but AeroShell Fluid 1 must never be used as an alternative to AeroShell Turbine Oil 3.
Click here for AeroShell Fluid 1

AeroShell Fluid 3
AeroShell Fluid 3 is a general purpose mineral lubricating oil recommended for general lubrication of aircraft parts that require a light oil with good low temperature characteristics and a low freezing point. It is inhibited against oxidation and corrosion. AeroShell Fluid 3 is a relatively low viscosity product with good resistance to evaporation.
AeroShell Fluid 3 is recommended for general lubrication of aircraft parts that require a light oil, e.g. hinges, pivot joints, shaft joints, linkage pins and bearings, pulleys, cables, camera mechanisms, radio and radar gear and instruments. AeroShell Fluid 3 is normally applied by means of an oil can or brush. For this reason it is also described as 'an oilcan lubricant'. Operating temperature range of AeroShell Fluid 3 is -54°C to +121°C.
Click here for AeroShell Fluid 3

AeroShell Fluid 12
AeroShell Fluid 12 is a low volatility synthetic ester oil used in aircraft instruments and also for the general lubrication of aircraft. It is oxidation and corrosion inhibited, and possesses good high and low temperature characteristics.
AeroShell Fluid 12 is used for general aircraft lubrication as well as for aircraft gyro instrument gimbal bearings, separately lubricated high speed turbines and compressors, aircraft air cycle equipment and electronic equipment. AeroShell Fluid 12 is particularly suitable for use when an oil with a low evaporation rate is required at high and low temperatures
Click here for AeroShell Fluid 12


 

Call the customer services team - 0845 130 1110