|
Shell Aviation can offer a range of Aeroshell greases designed to fill almost every lubrication
need of the aviation community. There follows very brief descriptions of the major products in
the AeroShell Grease range.
AeroShell Grease 5
Wheel bearing and engine accessory grease MicrogelŽ thickened, mineral oil
base Combines high load-carrying ability with excellent resistance to water
and high temperatures. It inhibited against corrosion and oxidation, and has
a useful temperature range of -23°C to + 177°C. Used primarily in aircraft
wheel bearings and engine accessories operating at high speeds and relatively
high temperatures.
Click here for AeroShell Grease 5 products
AeroShell Grease 6
General Purpose airframe grease MicrogelŽ thickened, mineral oil base
Inhibited against corrosion and oxidation, it features outstanding low temperature
torque properties and resistance to water. Useful temperature range of -40°C to +121°C.
Used primarily in plain and anti-friction bearings on general aviation aircraft.
Click here for AeroShell Grease 6 products
AeroShell Grease 7
Advanced multipurpose airframe grease MicrogelŽ thickened, synthetic diester oil base.
Corrosion inhibited and fortified to resist oxidation, it combines excellent load-carrying
capacity with a useful temperature range of -73°C to + 149°C. Recommended for highly loaded
gears and actuator screw mechanisms, as well as for instrument and general airframe lubrication.
Click here for AeroShell Grease 7 products
AeroShell Grease 14
Leading
multipurpose helicopter grease Calcium soap thickened, mineral oil base.
Inhibited against corrosion and oxidation, it is compounded with special anti-rust additives,
and gives outstanding protection against fretting and moisture corrosion. Useful temperature
range is -54°C to +93°C. Approved by all leading helicopter manufacturers. Recommended for
most helicopter main and tail rotor bearings; widely used as a general purpose helicopter grease.
Click here for AeroShell Grease 14 products
AeroShell Grease 15
Extreme temperature ball and roller bearing grease. Teflon thickened, silicone oil base.
Inhibited against corrosion and oxidation, it possesses excellent high temperature and mechanical stability properties, low evaporation rate and superior resistance to water wash-out.
Intended for lightly loaded ball and roller bearings over a temperature range of -73°C to +232°C.
Recommended for continuous high temperature service, e.g. in turbine engine controls, and for low temperature applications where low torque properties are required.
Click here for AeroShell Grease 15 products
AeroShell Grease 16
Superior
anti-friction bearing grease. MicrogelŽ non-melting inorganic thickener. Recommended for anti-friction bearings operating under load at high speeds and high or low temperatures.
It is made with a blend of synthetic polyolester and mineral oil and MicrogelŽ non-melting inorganic thickener, which provides long life and high water resistance.
It has a useful temperature range of -65°C to +204°C.
Click here for AeroShell Grease 16 products
AeroShell Grease 17
Extreme Pressure variant of AeroShell Grease 7 with 5% molybdenum disulphide. Recommended as a general purpose airframe grease, particularly for heavily loaded sliding steel surfaces where protection against seizure and corrosion is desired, e.g. bogie pivot pins on jet aircraft landing assemblies. It also provides outstanding anti-friction bearing lubrication.
Useful temperature range is -73°C to +149°C.
Click here for AeroShell Grease 17 products
AeroShell Grease 22
Versatile
multipurpose grease MicrogelŽ thickened, synthetic hydrocarbon oil base.
Corrosion inhibited and fortified against oxidation, it has excellent anti-wear properties, load-carrying capacity and water resistance, plus a wide useful temperature range of -65°C to +240°C.
Recommended for aircraft wheel bearings, engine accessories and airframe lubrication, and for anti-friction bearings operating at high speeds and at high or low temperatures.
Click here for AeroShell Grease 22 products
AeroShell Grease 33
Universal
airframe grease Lithium complex thickened, synthetic hydrocarbon/ester oil base Developed with the purpose of satisfying almost all airframe lubrication requirements with a single grease. Its enhanced corrosion resistance and load-carrying capacity reduces wear and tear and can lead to extension of re-greasing intervals and reduction in maintenance costs. Replacing several greases with a single grease avoids the risk of misapplication and also reduces stock inventory, again providing cost savings. Useful temperature range is -73°C to +121°C.
|
