|
|
ANDEROL 555 SYNTHETIC COMPRESSOR OIL 5LT
ANDEROL 555 is an ISO 100 diester based synthetic compressor lubricant specifically designed to provide longterm lubrication in process gas compressors.
£69.90
(£83.88
inc. VAT)
Leadtime 17 Days
|
ANDEROL 555 SYNTHETIC COMPRESSOR OIL 5USG
ANDEROL 555 is an ISO 100 diester based synthetic compressor lubricant specifically designed to provide longterm lubrication in process gas compressors.
£380.27
(£456.32
inc. VAT)
Leadtime 38 Days
|
ARMITE ANTI SEIZE 328 1LB CAN BMS3-28
General purpose anti-seize compound which can be used up to 350°F and for threaded parts in contact with aluminum and magnesium alloys.
£59.39
(£71.27
inc. VAT)
In Stock
|
ARMITE PETROLATUM TECHNICAL VV-P-236 1LB CAN
Armite Petrolatum Technical Light Lubricating Grease Spec. VV-P-236 This petrolatum is intended for use as a light grade lubricating grease. It is not recommended for use as a lubricant in heavy loaded or hot-running bearings.
£16.72
(£20.06
inc. VAT)
In Stock
|
ARPOLUBE 14107 WEAPON OIL 1USQ CAN
Arpolube 14107 is a light colored synthetic lubricant and preservative oil formulated as a weapons preservative and lubricating oil for aircraft and ground based small weapons. Proper usage of this oil insures efficient firing at low temperatures.
£74.39
(£89.27
inc. VAT)
Leadtime 24 Days
|
ARPOLUBE 14107 WEAPON OIL 1USQ MIL-PRF-14107D
Arpolube 14107 is a light colored synthetic lubricant and preservative oil formulated as a weapons preservative and lubricating oil for aircraft and ground based small weapons.
£74.39
(£89.27
inc. VAT)
Leadtime 59 Days
|
ASSEMBLY FLUID 682 1USQ
AFS-682 Hydraulic Assembly Lube is for assembly of hydraulic components using MIL-H-5606, MIL-H 83282 and other petroleum based hydraulic fluids.
£252.57
(£303.08
inc. VAT)
In Stock
|
BOELUBE 70104 RED 1LT
BOELUBE 70104 is non-toxic, non-irritating, environmentally safe synthetic lubricant manufactured from personal care ingredients that is effective for machining many types of materials.
£82.16
(£98.59
inc. VAT)
Leadtime 28 Days
|
|
|
CARBAFLO 2455 GREASE 1KG TIN
Carbaflo® 2455 is a UV traceable, chemically and thermally stable, high performance grease.
£253.48
(£304.18
inc. VAT)
Leadtime 17 Days
|
CARBAFLO 790 SOLVENT 1KG TIN
Carbaflo® 790 is a non-flammable, inert and nontoxic fluid that is a viable replacement for other ozone depleting solvents that are subject to restriction by the government.
£87.33
(£104.80
inc. VAT)
Leadtime 17 Days
|
£85.97
(£103.16
inc. VAT)
Leadtime 28 Days
|
DGF123 GRAPHITE DRY SPRAY 9OZ
DGF 123 Dry Graphite Film Spray is for pre assembly and assembly lubrication.
£10.56
(£12.67
inc. VAT)
Leadtime 31 Days
|
ELECTROLUBE CG70 CONTACT LUBE 35ML SYRINGE CG70 MOQ 10 X 35ML
The CG70 contact lubricant has been developed to offer enhanced electrical and mechanical properties, whilst being suitable for use with modern (and often very sensitive) plastics and under the more arduous conditions that are required by the leaders in today’s automotive industry.
£22.30
(£26.76
inc. VAT)
Leadtime 24 Days
|
ENGINE OIL GRADE 15W/40 5USG MIL-PRF-2104G
Heavy Duty Diesel 15W-40 Motor Oil is specifically engineered to meet the needs of engines requiring API Service Category CJ-4 / SL. Recommended for naturally aspirated, turbocharged or supercharged diesel, gasoline, or propane engines.
£281.68
(£338.02
inc. VAT)
Leadtime 31 Days
|
EUROCUT 444HDS CUTTING OIL 205LT DRUM
Eurocut 444HDS is a multipurpose higher oil containing biostable semi-synthetic watermix coolant. Whilst not considered a traditional EP Fluid EUROCUT, 444HDS has improved load carrying performance when compared with conventional semi-synthetic fluids.
£1262.96
(£1515.55
inc. VAT)
Leadtime 17 Days
|
EUROCUT 767LF FLUID LUBRICANT 20LT
EUROCUT 767 LF is a multipurpose, semi synthetic water soluble cutting and grinding fluid. It is a long life fluid, formulated for high performance on difficult machining operations with low staining characteristics on aluminium alloys.
£175.00
(£210.00
inc. VAT)
Leadtime 10 Days
|
EVERLUBE ESNALUBE 382 USQ
Esnalube 382 is a low VOC, thermally cured; MoS2 based solid film lubricant with a silicate binder system.
£132.50
(£159.00
inc. VAT)
Leadtime 24 Days
|
|
|
£22.07
(£26.48
inc. VAT)
Leadtime 24 Days
|
£14.32
(£17.18
inc. VAT)
Leadtime 24 Days
|
HELLERINE M ZX36 FLUID 284ML BOTTLE DTD900/4877
Hellerine M is a fungistatic lubricant designed to dry slowly. This ensures that components stay lubricated longer, offering a wider scope for planning assembly procedures in cable looming work.
£7.46
(£8.95
inc. VAT)
In Stock
|
HENKEL SLA 1246EU 200KG
SLA 1246 EU is an extremely stable suspension of uniform, microscopic molybdenum disulphide particles in highly refined petroleum oil.
£5976.97
(£7172.36
inc. VAT)
Leadtime 0 Days
|
HERAEUS ADH PD860002 SPA 30CC TRW No 3 CARTRIDGE
PD 860002 SA and PD 860002 SPA are thermosetting single-component, solvent-free polymer adhesives, developed especially for the surface mounting of SMT components on to PCBs and for use on bare substrates.
£95.63
(£114.76
inc. VAT)
Leadtime 31 Days
|
JET-LUBE COPPERCREST 225GM (WAS DTD900-6065)
Coppercrest is a low friction, anti-seize lubricant manufactured from a combination of micro-size copper flakes and graphite, dispersed in a water resistant grease and fortified with antioxidants, plus rust and corrosion inhibitors.
£8.39
(£10.07
inc. VAT)
In Stock
|
|
|
JETLUBE MOLY PETROLATUM 500GM MIL-PRF-83483C
Jet Lube's Moly Petroleum anti-seize is manufactured to to prevent seizing during assembly or disassembly of aircraft engine spark plugs and threaded fasteners and fittings at temperatures below 800°F.
£36.21
(£43.45
inc. VAT)
In Stock
|
JETLUBE TFW 500GM
JETLUBE TFW Anti-Seize Thread Sealant with PTFE is a nonhardening, nontoxic sealant for sealing and protecting threaded connections.
£9.89
(£11.87
inc. VAT)
In Stock
|
JETLUBE ZINC PETROLATUM 500GM CID-A-A-59313
Jet-Lubes Zinc Petrolatum anti-seize is manufactued to conform to the requirements of former Military Specification CID (Commercial Item Description) A-A-59313.
£16.03
(£19.24
inc. VAT)
Leadtime 13 Days
|
|
|
LUBCON RAPID GT BLACK GRPAHITE SPRAY 400ML
RAPID GT a spray on graphite base - dry spray for the lubrication of sliding bearings at high temperature, e.g. for roaster and adjusting spindles, where conditions of application do not allow a hydro-dynamical lubrication with conventional greases.
£22.52
(£27.02
inc. VAT)
In Stock
|
LUBELOK 2109 DILUTED RTA USQ
Lube-Lok 2109 is a thermally cured, MoS2 based solid film lubricant with a high molecular weight epoxy binder system.
£64.89
(£77.87
inc. VAT)
Leadtime 31 Days
|
LUBRIBOND 220 12OZ AEROSOL MIL-L-23398 TYPE II
Lubri-Bond 220 is an air drying, MoS2 based solid film lubricant with an epoxy binder system. This coating provides good corrosion resistance and performs best in higher load carrying applications. It is ideal for applications that do not require a thermally cured coating. Lubri-Bond 220 is also an excellent touch-up lubricant for many of our thermally cured products. Lubri-Bond 220 is qualified to MIL-L-23398.
£20.17
(£24.20
inc. VAT)
In Stock
|
LUBRIPLATE 105 10OZ TUBE
The LUBRIPLATE "100" Series Products are excellent water-resistant lubricants designed for plain bearings, cams, slides and similar applications up to operating temperatures of 150°F.
£13.20
(£15.84
inc. VAT)
Leadtime 17 Days
|
LUBRIPLATE 130AA GREASE 1LB
LUBRIPLATE No’s. 130-A & 130-AA are designed for those applications where a grease-type lubricant possessing extremely good water repellency and superior lubrication characteristics are desired. These products are recommended for plain bearings, cams, guides, open gears, slides and chassis lubrication and where temperatures do not exceed 170°F.
£16.06
(£19.27
inc. VAT)
Leadtime 17 Days
|
LUBRIPLATE 130AA GREASE 6LB
LUBRIPLATE No’s. 130-A & 130-AA are designed for those applications where a grease-type lubricant possessing extremely good water repellency and superior lubrication characteristics are desired.
£70.23
(£84.28
inc. VAT)
In Stock
|
LUBRIPLATE 630AA 14OZ TIN
LUBRIPLATE No. 630-AA is an NLGI No. 1 lubricant and the most popular multipurpose general grease. Ideal for automatic dispensing systems and centralized systems with large lines.
£21.27
(£25.52
inc. VAT)
Leadtime 38 Days
|
LUBRIPLATE 930AA 14.05 OZ CARTRIDGE
The LUBRIPLATE "930" Series of lubricants are also listed as "multipurpose" but with a higher operating temperature range than the "630" Series. These lubricants possess high film strength and exceptional resistance to water, steam and other adverse operating conditions.
£11.98
(£14.38
inc. VAT)
Leadtime 31 Days
|
LUBRIPLATE MO-LITH 2 14.5OZ CARTRIDGE
Lubriplate Mo-Lith No. 2 is exactly what the name indicates a moly-lithium lubricant, containing Technical Fine Molybdenum Disulfide.
£11.24
(£13.49
inc. VAT)
In Stock
|
LUBYSIL BCO14 120ML AEROSOL
LUBYSIL BCO 14 Is A Unique Ultra Low Viscosity Cutting Fluid. Developed for machining very tough metals in the aerospace and nuclear industries. Increases tools life, improves surface finishes, enables closer tolerances to be maintained and is very well suited to machining very small diameter holes.
£8.80
(£10.56
inc. VAT)
In Stock
|
LUBYSIL BCO14 LUBRICANT 5LT HAZPAK*********
LUBYSIL BCO 14 Is A Unique Ultra Low Viscosity Cutting Fluid. Developed for machining very tough metals in the aerospace and nuclear industries.
£161.44
(£193.73
inc. VAT)
Leadtime 10 Days
|
|
|
MARVEL MYSTERY OIL 1USQ
Marvel Mystery Oil® lubricates the entire fuel system-fuel pumps, fuel injectors or carburetors and the top portion of the cylinders.
£21.44
(£25.73
inc. VAT)
Leadtime 17 Days
|
|
|
MILLER MS122FD 400ML AEROSOL
Ms122FD is a new and improved Miller-Stephenson Release Agent/Dry Lubricant, with PTFE of smaller particular size, which use the magic of DuPont's Teflon chemistry to create suspensions of low molecular weight poly tetrafluroethylene (PTFE).
£10.55
(£12.66
inc. VAT)
Leadtime 31 Days
|
MILLER MS538 14OZ
Excellent for cleaning and lubricating contacts, switches, relays, tuners, encoders, slide wires, rheostats, distribution panels and servomechanisms to restore electrical and mechanical continuity.
£14.10
(£16.92
inc. VAT)
Leadtime 45 Days
|
MOLYSLIP COPASLIP 5KG TIN
Copaslip is an anti-seize compound consisting of finely divided metallic lead and micro-sized particles of copper in a non-melt bentone grease with highly effective oxidation and corrosion inhibitors. Molyslip Copaslip is an anti-seize pre-assembly compound for use in any temperature from sub-zero to 1100ºC (2000ºF). Solidifies at -18ºC (0°F).
£100.57
(£120.68
inc. VAT)
Leadtime 17 Days
|
£125.78
(£150.94
inc. VAT)
Leadtime 17 Days
|
PARKER O LUBE 110GM TUBE (40Z)
Parker O-Lube is a petroleum-based grease recommended for use with polyacrylate, Vamac, neoprene, fluorosilicone, nitrile, HNBR, polyurethane, fluorocarbon, Aflas, Hifluor, and Parofluor o-ring materials.
£22.51
(£27.01
inc. VAT)
Leadtime 17 Days
|