HARDMAN DOUBLE BUBBLE 1 BOX OF 50 SATCHETS
Double/Bubble will bond to a wide variety of materials (i.e. wood, metal, plastic and ceramic) and cures rapidly to give handling strength in approximately 5 minutes. It is ideal for bonding small components or for carrying out small repair jobs. Double/Bubble is packed into a handy sachet, and supplied complete with a mixing stick and pallet.
£49.67
(£58.36
inc. VAT)
In Stock
|
£14.39
(£16.91
inc. VAT)
Leadtime 21 Days
|
PERMABOND 240 (C4) 20GM BOTTLE
Permabond 240 (previously Permabond C4) has been specifically developed to provide a slower cure than most cyanoacrylates.
£11.34
(£13.32
inc. VAT)
In Stock
|
£30.31
(£35.61
inc. VAT)
In Stock
|
PERMABOND 910 (C3) 20GM BOTTLE
Permabond 910 is the original 100%‐methyl cyanoacrylate adhesive. It is a single part, low viscosity liquid that will cure rapidly at room temperature when pressed into a thin film between parts. Permabond 910 will cure to a fixture strength in 10 seconds on most surfaces and rapidly develops high strength with full cure obtained in 4 hours.
£11.88
(£13.96
inc. VAT)
In Stock
|
£16.27
(£19.12
inc. VAT)
In Stock
|
£14.96
(£17.58
inc. VAT)
Leadtime 21 Days
|
PERMABOND A1042 50ml BOTTLE
Perma-Lok A1042 is a rapid curing adhesive designed to lock and seal metal parts which, subsequently, may need to be dismantled for maintenance. The high vibration resistance makes Perma-Lok A1042 particularly suited to replacing lock washers, split pins and other mechanical locking devices. The well proven chemical resistance of Perma-Lok A1042 will reduce the effects of corrosion and make it suitable for sealing small hydraulic and pneumatic fittings.
£22.75
(£26.73
inc. VAT)
In Stock
|
£11.80
(£13.87
inc. VAT)
Leadtime 1 Days
|
£23.44
(£27.54
inc. VAT)
In Stock
|
PERMABOND A118 50ML BOTTLE
Permabond A118 is an anaerobic adhesive designed to provide permanent locking and sealing of metal parts such as bearings, gears, studs and other threaded components. It exhibits high strength, excellent durability and resistance to vibration, fatigue and fretting corrosion. These features allow machining tolerances to be relaxed, and mechanical locking devices to be eliminated, with consequent cost savings.
£23.44
(£27.54
inc. VAT)
In Stock
|
PERMABOND A126 50ML BOTTLE
Permabond A126 is a high-strength anaerobic adhesive for permanent assembly of coaxial assemblies or threaded metal components. The exceptionally low viscosity of this product makes it ideal for use on tight fitting components or where the adhesive needs to be applied after assembly. In addition it may also be used to seal porosity in welds or castings.
£23.91
(£28.09
inc. VAT)
In Stock
|
£16.22
(£19.06
inc. VAT)
In Stock
|
PERMABOND A136 GASKET 50ML
Permabond A136 is an anaerobic material designed for making 'formed in situ' gaskets between metal surfaces. It is capable of replacing a wide range of conventional gaskets thereby offering potential for reduced stock holdings.
£22.27
(£26.17
inc. VAT)
In Stock
|
PERMABOND A905 200ML AEROSOL
A905 is used in conjunction with Permabond Anaerobic adhesives and sealants and allows non metallic surfaces to be bonded or sealed. It also accelerates the cure rate of Permabond anaerobics, and extends the gap filling capabilities of these adhesive. Permabond A905 can be supplied either as an aerosol spray, for ease of application, or as a bulk liquid for use in high volume applications.
£10.94
(£12.85
inc. VAT)
In Stock
|
£33.19
(£39.00
inc. VAT)
In Stock
|